The mud circulation on a drilling platform is a complex, fully closed-loop system. From mud tank suction, mud pump pressurization, manifold distribution, riser delivery to the top drive for drilling tool injection, and then back to the mud treatment system from the wellhead, the entire chain spans multiple compartments and deck levels on the platform. The pressure, media, and dynamic characteristics at different locations are completely different, so a single type of hose cannot be used for all nodes. Drilling platform mud delivery hoses have formed a complete product matrix covering all pressure levels and all scenarios. Dedicated specifications are available for each node's operating conditions, ensuring precise adaptation of every flexible connection in the entire circulation chain, eliminating performance bottlenecks.
Full Coverage of High and Low Pressure Nodes, Matching Pressure Gradients Throughout the Entire Process
In the low-pressure suction section from the mud chamber to the mud pump inlet, the hose adopts a semi-rigid structure with embedded spiral steel wire, preventing collapse and blockage during high negative pressure suction. The smooth inner wall design reduces the deposition of solid particles in the mud. In the high-pressure section from the mud pump outlet to the high-pressure manifold, a multi-layer steel wire wound high-pressure reinforced structure is used, capable of withstanding pulse impacts of 5000psi or even higher pressures, while absorbing high-frequency vibrations generated by pump operation. In the dynamic connection section from the riser top to the top drive, a highly flexible version is used with a smaller minimum bending radius, preventing bending fatigue during repeated up-and-down swinging with the top drive. In the low-pressure treatment section for mud return, a large-diameter, thickened, wear-resistant hose is used to transport return mud carrying cuttings, withstanding long-term erosion and wear from high-solid-phase particles.
Adaptable to Special Operating Scenarios, Supporting the Platform's Multifunctional Operational Needs
In addition to conventional drilling cycles, drilling platforms also undertake various special operations such as cementing, fracturing, oil testing, and well control, which places differentiated requirements on the hoses. During cementing operations, hoses must withstand the erosion of high-density cement slurry. The inner layer uses a highly wear-resistant, non-stick formula to prevent cement slurry from solidifying and adhering to the pipe wall, causing blockages. During fracturing operations, they must withstand higher-pressure fracturing fluid pulses and abrasion from sand-containing media. During well control operations, kill hoses must have higher safety redundancy, maintaining reliable sealing even under extreme pressure fluctuations, readily responding to sudden well control risks without requiring temporary pipeline replacement.
Multi-media compatibility, covering various fluid transport on the platform
In addition to conventional water-based and oil-based mud, hoses on the platform frequently come into contact with seawater, barite powder, various drilling fluid chemical treatment agents, and occasionally transport diesel, completion fluids, and other media. The inner layer of the drilling platform mud transport hose uses a broad-spectrum corrosion-resistant formula, exhibiting good compatibility with common drilling fluid additives, weak acids and alkalis, seawater, and mineral oil. This eliminates the need for frequent hose replacements for different media, reducing the types of spare parts inventory on the platform and lowering the risk of mismatched hoses for maintenance personnel, ensuring stable and reliable fluid transport across all aspects of the platform.
The mud circulation on a drilling platform is a complex, fully closed-loop system. From mud tank suction, mud pump pressurization, manifold distribution, riser delivery to the top drive for drilling tool injection, and then back to the mud treatment system from the wellhead, the entire chain spans multiple compartments and deck levels on the platform. The pressure, media, and dynamic characteristics at different locations are completely different, so a single type of hose cannot be used for all nodes. Drilling platform mud delivery hoses have formed a complete product matrix covering all pressure levels and all scenarios. Dedicated specifications are available for each node's operating conditions, ensuring precise adaptation of every flexible connection in the entire circulation chain, eliminating performance bottlenecks.
Full Coverage of High and Low Pressure Nodes, Matching Pressure Gradients Throughout the Entire Process
In the low-pressure suction section from the mud chamber to the mud pump inlet, the hose adopts a semi-rigid structure with embedded spiral steel wire, preventing collapse and blockage during high negative pressure suction. The smooth inner wall design reduces the deposition of solid particles in the mud. In the high-pressure section from the mud pump outlet to the high-pressure manifold, a multi-layer steel wire wound high-pressure reinforced structure is used, capable of withstanding pulse impacts of 5000psi or even higher pressures, while absorbing high-frequency vibrations generated by pump operation. In the dynamic connection section from the riser top to the top drive, a highly flexible version is used with a smaller minimum bending radius, preventing bending fatigue during repeated up-and-down swinging with the top drive. In the low-pressure treatment section for mud return, a large-diameter, thickened, wear-resistant hose is used to transport return mud carrying cuttings, withstanding long-term erosion and wear from high-solid-phase particles.
Adaptable to Special Operating Scenarios, Supporting the Platform's Multifunctional Operational Needs
In addition to conventional drilling cycles, drilling platforms also undertake various special operations such as cementing, fracturing, oil testing, and well control, which places differentiated requirements on the hoses. During cementing operations, hoses must withstand the erosion of high-density cement slurry. The inner layer uses a highly wear-resistant, non-stick formula to prevent cement slurry from solidifying and adhering to the pipe wall, causing blockages. During fracturing operations, they must withstand higher-pressure fracturing fluid pulses and abrasion from sand-containing media. During well control operations, kill hoses must have higher safety redundancy, maintaining reliable sealing even under extreme pressure fluctuations, readily responding to sudden well control risks without requiring temporary pipeline replacement.
Multi-media compatibility, covering various fluid transport on the platform
In addition to conventional water-based and oil-based mud, hoses on the platform frequently come into contact with seawater, barite powder, various drilling fluid chemical treatment agents, and occasionally transport diesel, completion fluids, and other media. The inner layer of the drilling platform mud transport hose uses a broad-spectrum corrosion-resistant formula, exhibiting good compatibility with common drilling fluid additives, weak acids and alkalis, seawater, and mineral oil. This eliminates the need for frequent hose replacements for different media, reducing the types of spare parts inventory on the platform and lowering the risk of mismatched hoses for maintenance personnel, ensuring stable and reliable fluid transport across all aspects of the platform.
Online Message
Please fill in your name and message, and don't forget to email and/or call if you wish. We will reply within 24 hours.
